Announcement
Collapse
No announcement yet.
Search Result
Collapse
21 results in 0.0014 seconds.
Keywords
Members
Tags
-
sleepX
You can also choose from the popular tags.
-
Wake up from sleep using UART pins
Hello--I'm using SM200 or RF200P81 in WSN. The sensor's node transmit data over-the-air upon receiving data over UART1. I would ask if it would be possible...Last edited by w.balid; 06-30-2015, 01:53 PM.
- 3 posts
-
Beacon enabled network
We have a SNAP application which is in fact a star network. In each star network sits a central fixed node without power constraint which acts as a master...Last edited by svesch; 12-04-2014, 04:29 AM.
- 1 post
-
Elapse time to go into deep sleep mode
We are working on a low battery power consumption with ZIC2410, it takes approximately 9 seconds to deep sleep mode. With the Maximum sleep timer value...
- 11 posts
-
Sleep after forwarding multicast?
Hello,
When a SNAP node receives a multicast, it will also forward that multicast. I want to put the node to sleep as soon as the multicast...Last edited by berwyn; 06-10-2014, 08:08 PM.
- 8 posts
-
Mcast sleep cmd
We have some older RF100's (2.2.16) in a linear mesh topology. If we send an mcastrpc that tells the units all to go to sleep (immediately) will each...
- 5 posts
-
Struggles with wakeupOn & Sleep(1,0)
RF200/Atmel part.
Seiko RTC wired to GPIO-6 (pin 21)
We set the RTC to "alarm" every minute & it lowers GPIO-6 as...
- 4 posts
-
RF300 Sleep Current
Hello,
New to Synapse radios here...
I'm attempting to get my sleep current down as low as possible with the RF300 engine...
- 3 posts
-
Waking up from sleep mode
How do we know that the device has woken up from sleep mode. Is there a hook for this?
I mean I can use the timer call to do that but that...
- 14 posts
-
Problem with ore than one wakeup Pin on PAN4561
Hi there
My Problem with slept away Devices still persists.
On an PAN4561 as a raw module I use these PINs as "Wakeup-Interr...Last edited by frille; 01-14-2013, 08:56 AM.
- 1 post
-
RF266PC1 Wake Response Time
Can anyone tell me what the approximate wake response time (from sleep mode) is before the node can participate in mesh traffic?
I wish...
- 3 posts
-
Dealing with reception buffer and sleeping
My modules pass time in sleep and wake up period constantly. On a applicative event, one of my modules wake up and transmit a time related information....
- 3 posts
-
Strange behaviour with wakeupon() on PAN4561_SE
Hi,
to save Consumption I want to use sleep(0,0). My Device should wake up on multiple PinEvents. 2 Counters and 2 RTC-Alarms.
This...
- 7 posts
-
Sleep or stay awake?
Hello,
I am trying to save consumption using "sleep"
Has anyone experiences how long it takes to go in sleep-mode or to...
- 4 posts
-
RF200 inaccurate sleep
I have a solid problem with the RF200 module. While trying to implement a battery powered sleepy mesh, it constantly went out of sync.
Just...
- 10 posts