10 results in 0.0014 seconds.
-
PWM affected by I2C on a RF200
I have a RGB LED connected to a RF200. I also have some sensors and a RTC connected. I am using some of the code from Eric Ibarra's 2011 AtmelPWM.py program.... -
Anyone with experience using Intersil ISL12022M RTC?
I have little expierence with i2c and I am trying to set the clock on the Intersil ISL12022M (http://www.intersil.com/content/dam/...isl12022m.pdf). I...Last edited by Cathy_Hanna; 01-07-2017, 12:17 PM. -
Sudden failure in data collection / positioning system
I am designing a system that collects temperature data and does very basic positioning by monitoring the link quality between nodes. The broad strokes... -
Using the SN171 and TI TLC59108F to control LEDs
I am very new to programming and am attempting my first try at programming an LED using I2C. I’ve been asked to use the TI TLC59108F LED driver to control... -
DK-200 Development Kit and I2C programming
I am trying use the DK-220 developement kit to learn I2C programming.
Should I be able to use the SN172 ProtoBoard as a master and the... -
Clarify poke() syntax
The SNAP Network Operating System Reference Manual (version 2.5) defines, in part, poke() as:
"poke(address[High], [addressLow, word,]... -
RF266PC1 I2C problems
Hello, I am using an RF266. I am trying to control a Triple Axis Accelerometer and Gyro MPU6050 using I2C. When I hook up the board the SCL line is held... -
RF100 <=> Sparkfun HIH6130 Breakout Temperature/Humidty I2C
I'm trying to access temperature and humidity data from a Sparkfun HIH6130 breakout board from a ProtoBoard + RF100. Two calls are required to the sensor,... -
SPI and I2C
My RF100PC6 is exhibiting some odd behavior. We are communicating with an I2C eeprom on an I2C bus with two I2C eeproms and two Microchip dsPic33F control... -
I2C Bit-Banged Routines
This script (ReadSMB.py) was developed to read the registers of a battery using the System Management Bus to access its parameters. It is bit-banged,...
