Announcement
Collapse
No announcement yet.
Search Result
Collapse
23 results in 0.0004 seconds.
Keywords
Members
Tags
-
You can also choose from the popular tags.
-
PWM affected by I2C on a RF200
I have a RGB LED connected to a RF200. I also have some sensors and a RTC connected. I am using some of the code from Eric Ibarra's 2011 AtmelPWM.py program....
- 4 posts
-
RF266PC1 Firmware Update (become a RF200)
Hi I did update Portal to latest revision (2.7.5) that includes firmware for the RF266PC1 (RF266PC1_AES128_SnapV2.7.2.sfi) but when I did a firmware update...
- 6 posts
-
Sudden failure in data collection / positioning system
I am designing a system that collects temperature data and does very basic positioning by monitoring the link quality between nodes. The broad strokes...
- 7 posts
-
COM3: Unable to open
I have a DK-200 development kit. I loaded the LinkQualityRanger.py that came with Portal onto the RF266. It froze and will no longer connect. I get a...
- 5 posts
-
RF266 25 integer additions takes 5ms?
I was experiencing a performance problem in a script and bisected it to the following code taking up as much a 5ms.
I have segment of code...
- 2 posts
-
Outputting getLq between two RF266 antennas
Hi,
I'm trying to output getLq signal strength in binary between two RF266 antenna chips. I put the code I've attached below on both of the antenna...
- 1 post
-
Amplifying RF266 signal
Hi,
I was wondering if there was any way to amplify the RF266 signal to reach a larger distance.
Thanks!
- 1 post
-
Outputting RSSI Information RF266
Hi,
I was wondering if anyone knows how to output RSSI to a specific pin on the RF266. I set up a serial link between my two RF266 antennas and...
- 5 posts
-
RF266 Pin Layout
Hi everyone,
I'm trying to output an RF266's signal strength information from a pin using an Xbee explorer regulated board (https://ww...
- 2 posts
-
dynamic uniConnecting
I am using an RF266 to communicate with a camera module. I am using UART1 through the stdio. I can successfully communicate from the RF266 to the camera...
- 4 posts
-
Downloaing new updates to a RF266 from my web site
I have a product that uses two RF266 modules. I want the users of my product to download new RF266 code updates from my web site. They will be able to...
- 7 posts
-
readadc() that is 3.3V on RF266
It is my understanding that the RF266 will only read voltages between 0 and 1.7V. I have a wind vane that puts out 0 to 3.3V depending on the direction....
- 2 posts
-
passing print statements to bluetooth through RF266
I have two RF266's communicating and I want to see both print statements coming out of the Bluetooth module. Here is my setup:
I have...
- 5 posts
-
shutting off the PWM timer on RF266
My PWM motors are drifting forward and backward because the motors need to be tuned with a trim pot . I don't want to adjust all 2000 motors so I need...
- 2 posts
-
RF266PC1 I2C problems
Hello, I am using an RF266. I am trying to control a Triple Axis Accelerometer and Gyro MPU6050 using I2C. When I hook up the board the SCL line is held...
- 10 posts